Concurrent Determination of U‐Pb Age and REE Mass Fractions of Zircon by High Mass Resolution SIMS

A combined geochronological and geochemical investigation for the same domain of zircon provides valuable information on timing and genesis, particularly in the case of multi‐growth metamorphic zircon. A high spatial resolution concurrent analytical method for zircon U‐Pb age and rare earth element content was successfully achieved in this study, using a multi‐collector secondary ion mass spectrometer (SIMS) at a ~ 8 μm diameter scale. Special instrument parameters were employed, including a high mass resolution of approximately 15000 applied to replace the previous energy filter method, and a dynamic multi‐collector mode used to reduce the measurement time to 18 min per analysis. Six zircon reference materials yielded precise and accurate ²⁰⁶Pb/²³⁸U ages, which are comparable to those obtained by the ordinary mono‐collector method, but with 2–3 times higher spatial resolution. All zircon grains measured in this study showed enriched heavy‐REE (HREE) contents consistent with previously reported values determined by LA and solution ICP‐MS methods. The light‐REE (LREE) mass fractions measured using both SIMS and LA‐ICP‐MS methods in this study, although with quite different volume, show consistent results within uncertainties.     

广州城市流浪乞讨者的空间管治与日常生活实践

以广州流浪乞讨者为研究对象,通过深度访谈等质性研究方法,解读针对流浪乞讨者的空间管治政策与手段,分析流浪乞讨者的日常生活实践与生境协商。研究发现：在地方城市政策对流动性与公共秩序限制的双重压力下,在流浪乞讨者的日常生活实践中,不仅有针对管治行动者而刻意为之的特殊营建,亦有基于程式化生活流程对自我身份认同的重塑与真情实感的展演。地方政府基于空间目标的救助与真实存在的日常生活实践存在着一种张力。研究关注了城市边缘群体日常生活对地理意义的主动塑造过程,对全面理解并规范管理中国城市流浪乞讨现象具有借鉴意义。     

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.     

Bibliometric Analysis of Global Research Progress on Coastal Flooding 1995–2016

Global research progress on coastal flooding was studied using a bibliometric evaluation of publications listed in the Web of Science extended scientific citation index. There was substantial growth in coastal flooding research output, with increasing publications, a higher collaboration index, and more references during the 1995–2016 period. The USA has taken a dominant position in coastal flooding research, with the US Geological Survey leading the publications ranking. Research collaborations at institutional scales have become more important than those at global scales. International collaborative publications consistently drew more citations than those from a single country. Furthermore, coastal flooding research included combinations of multi-disciplinary categories, including ‘Geology' and ‘Environmental Sciences Ecology'. The most important coastal flooding research sites were wetlands and estuaries. While numerical modeling and 3 S(Remote sensing, RS; Geography information systems, GIS; Global positioning systems, GPS) technology were the most commonly used methods for studying coastal flooding, Lidar gained in popularity. The vulnerability and adaptation of coastal environments, their resilience after flooding, and ecosystem services function showed increases in interest.     

风和径流量对长江口缺氧影响的数值模拟

受自然和人类活动的影响，海洋缺氧现象日益严重，威胁着海洋生态环境，海洋缺氧问题已经引起了人们的广泛关注。本文应用区域海洋模式并耦合生态模式，对东海的生态系统进行了数值模拟和分析研究。与观测数据比较显示，该模型能较好地模拟长江口外生态变量的分布趋势。另外本文通过设置不同敏感性实验，探讨风和径流量对长江口底层缺氧现象的影响，结果分析表明，风和径流量对长江口外缺氧区的形成有显著的影响。径流量变化虽然对长江口外缺氧区的季节变化影响并不显著，但是对缺氧区域面积却存在显著的影响。径流量增加，水体层化增强，表层叶绿素浓度增加，最终导致缺氧区域范围扩展；径流量减小，水体层化减弱，表层叶绿素浓度减小，缺氧区域范围缩小。风向和风速的改变不仅影响长江口外缺氧区的季节变化，还影响缺氧区域面积。     

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

高速铁路无砟轨道地基泥岩膨胀性分类分级研究

红层泥岩是一种典型侏罗系沉积岩，其含有微量黏土矿物，易遇水软化、失水崩解，具有一定膨胀性，是引起兰新高速铁路路基持续上拱变形的一个重要因素，故重新判定该种土体膨胀性对高速铁路无砟轨道设计和施工具有重要意义。为此，选取等效蒙脱石含量、阳离子交换量、自由膨胀率和液限为泥岩膨胀性判别指标，通过兰新高速铁路上拱地段大量钻孔实测资料，提出了泥岩膨胀等级分级标准，采用改进层次分析法、基尼系数法和直觉模糊理论确定了判别指标组合权重，基于逼近理想解排序法(TOPSIS法)建立了泥岩膨胀性直觉模糊综合评价模型。结果表明：直觉模糊综合评价模型将泥岩膨胀性进行了定量化，克服了同一试样不同指标属于不同等级判别缺陷；室内膨胀量试验验证了膨胀等级分级标准和直觉模糊综合评价模型对兰新高铁地基泥岩适用性和准确性。研究成果对地基红层泥岩高速铁路路基长期持续上拱变形风险评估和工程控制措施提供技术支撑。     

堆积阶地古老滑坡识别方法及其在线状工程地质勘察中的应用

阶地型古老滑坡体形成后，长期受各种营力影响，导致古老滑坡地貌形态破坏严重甚至消失。目前遥感技术和普通工程地质调绘很难发现这些滑坡的存在，给工程建设和后期运营造成较大安全隐患。为准确识别形态特征不明显的古老滑坡体，从阶地物质结构特征演变入手，找到阶地受剪切破坏产生的典型物质结构特征，将地层结构错断、卵砾石异常定向排列、摩擦镜面和泥包粒的眼球构造等作为滑坡准确识别依据。首先采用沿沟谷进行工程地质测绘的纵横交错追踪法确定滑坡体纵向范围和滑面形状，再结合地貌特征推测各级、块滑坡平面范围和分布，最后用点状勘探工程验证和校正推测结论。可将其总结为由"地貌异常、沿沟追踪、面上推断、点状校验"组成的阶地型滑坡识别方法，即物质结构异常推断法。结合线状工程勘察设计各阶段工作特点，提出线状工程前期工作中阶地型滑坡识别步骤，并在临渭高速公路工程建设项目中取得成功应用。     

A machine learning approach for predicting computational intensity and domain decomposition in parallel geoprocessing

ABSTRACT

High performance computing is required for fast geoprocessing of geospatial big data. Using spatial domains to represent computational intensity (CIT) and domain decomposition for parallelism are prominent strategies when designing parallel geoprocessing applications. Traditional domain decomposition is limited in evaluating the computational intensity, which often results in load imbalance and poor parallel performance. From the data science perspective, machine learning from Artificial Intelligence (AI) shows promise for better CIT evaluation. This paper proposes a machine learning approach for predicting computational intensity, followed by an optimized domain decomposition, which divides the spatial domain into balanced subdivisions based on the predicted CIT to achieve better parallel performance. The approach provides a reference framework on how various machine learning methods including feature selection and model training can be used in predicting computational intensity and optimizing parallel geoprocessing against different cases. Some comparative experiments between the approach and traditional methods were performed using the two cases, DEM generation from point clouds and spatial intersection on vector data. The results not only demonstrate the advantage of the approach, but also provide hints on how traditional GIS computation can be improved by the AI machine learning.